News

How To Correctly Select The Valve Drive

Dec 26, 2024 Leave a message

  • A valve actuator is a device used to operate and connect to a valve. The device can be driven by a power source in the form of electricity, pneumatic-hydraulic or a combination thereof. Its movement process can be controlled by the size of the stroke, torque or axial thrust.
  • Since the valve drive device should work characteristics and utilization depends on the type of valve, the device's operating specifications and the location of the valve in the pipeline or equipment. Therefore, the correct choice of valve actuator and valve type and technical parameters related to the correct choice of valve actuator is based on
  1. The type, specification and structure of the valve.
  2. Valve opening and closing torque (pipeline pressure, maximum differential pressure of the valve), thrust.
  3. Maximum ambient temperature and fluid temperature.
  4. Maximum ambient temperature and fluid temperature.' ④ Mode of use and number of times of use.
  5. Opening and closing speed and time same.
  6. Stem diameter, screw moment, direction of rotation.
  7. Connection method.
  8. power source parameters: electric power supply voltage, number of phases, frequency pneumatic gas pressure; hydraulic medium pressure.
  9. special consideration of low temperature, corrosion, explosion-proof, waterproof, fire, radiation, etc., the 

Ball Valve

Valve drive device is the correct choice of the general principle is: the operating characteristics of the drive device is required to match the operating characteristics of the valve, general or do not need automatic control of the valve, optional manual drive; need to quickly open and close the valve, optional pneumatic or gas-liquid linkage drive; the need for automatic control or remote control of the valve, optional electric drive; in the flammable and explosive pipeline, if the optional electric device, the need for optional explosion-proof electric drive. Explosion-proof electric drives need to be selected.
1. The correct choice of valve electric device
Installation, connection mode electric device installation methods are vertical installation, horizontal installation, floor mounting
2. Valve pneumatic device correct choice
① operating torque: operating torque is the most important parameter for selecting the valve pneumatic device, the output torque of the pneumatic device should be greater than the operating torque of the valve, the general output torque of the pneumatic device should be the maximum operating torque of the valve 1.2 ~ 1.5 times.
② opening and closing speed is generally required for opening and closing speed of the valve before selecting the pneumatic device.
③ Matching principles: for gate valves, globe valves should generally be equipped with only reciprocating linear motion of the pneumatic device; for ball valves, butterfly valves and plug valves are generally only equipped with the reciprocating linear motion of the cylinder through the rack and pinion into a rotary action of the pneumatic device or swing cylinder pneumatic device; for the regulating valve is generally equipped with a diaphragm-type pneumatic device; for the long distance natural gas pipeline on the use of ball valves, usually use a pneumatic device, because it is easy to realize the use of its own pneumatic device. For ball valves used on long-distance natural gas pipelines, pneumatic devices are usually used because it is easy to realize automatic control using its own gas source.

As the valve hydraulic device can obtain a large output torque, so when driving the valve requires a large torque can be taken piece of hydraulic drive device.

 

Send Inquiry