1. The difference between the two spool structure is different. o-type ball valve flow path for a complete circle, with double seat seal. v-type ball valve is 1/4 half ball spool, one side of the V-shaped port, single seat seal. There is also a global spool, one end of the open V-shaped runner port, single-seat seal or double-seat seal form.
2. suitable for different media, O-type ball valves are mostly used for clean media, or a small amount of suspended particles in the media, PTFE PTFE seat seal, you can achieve zero leakage. But in the medium contains more impurities, or granular media, easy to occur in the cavity blockage, resulting in the ball valve hold dead, switch malfunction. v-type ball valves are mostly metal hard seal, used for fibre-containing, fine particles, slurry media. Because the V-shaped port and seat can cut fibre media, so widely used in the paper industry. Due to the use of part of the spherical spool, and is a single seat seal, effectively preventing the medium from blocking the valve.

3. different process control requirements. o-type ball valves are mainly used for switching control, regulating performance is not good. Fitted with AT pneumatic piston actuator, can achieve rapid cut-off. v-ball valve with V-shaped port, adjustable, adjustable ratio is large, up to 100:1 or higher. Equipped with pneumatic and electric actuators, mainly used for regulating control, can also be used for switching control.
4. different flow characteristics, the flow characteristics of O-type ball valve is fast-opening, suitable for switching control, V-type ball valve flow characteristics is approximate equal percentage, suitable for regulating control.
5. different size of the flow path. o-type ball valve flow path size generally have two kinds of full diameter and reduced diameter. v-type ball valve flow path according to the process and design requirements of different sizes, generally are reduced diameter. Different ball core can be replaced to meet different flow requirements.
