Knowledge

What is Single Opening Exhaust Valve

Dec 30, 2025 Leave a message

‌Single Opening Exhaust Valve is a safety device used in pipelines or equipment for one-way air venting, preventing backflow of air inside the system. It is typically used in conjunction with a pressure reducing valve and installed on pipelines requiring air release. When system pressure is too high or during pressure-holding discharge, the opening degree of the pressure reducing valve is adjusted to control the direction and flow rate of the air. When system pressure drops, the valve releases gas to reduce the medium pressure in the pipeline, thereby protecting downstream equipment and personnel safety.

 

‌Working Principle‌

When the ‌Single Opening Exhaust Valve is venting, the float sinks downward due to gravity, causing the lever to tilt. At this point, a gap forms between the lever's vent hole and the contact surface, allowing air to escape through the gap. As the air is expelled, the float rises upward under the buoyant force of the water, gradually pressing the lever's sealing surface against the vent hole until the entire vent hole is completely blocked. At this point, the vent valve enters a fully closed state.

 

Feature

1.The valve is suitable for water of less than or equal to 10℃ and hot water pipelines to exhaust the air completely from the pipelines.
2. When installing double openings exaust valves,a protective valve and a ball valve must be installed at the bottom in case it is tested to have stopped water.

 

Single Opening Exhaust Valve Drawning

Single Opening Exhaust Valve Drawning

Contact now

 

Technical Parameters

Part Name Material
Body,bonnet Cast iron HT200, Stainless steel, Carbon steel
Floating ball Stainless steel
Seal ring Nitrile rubber
Elastic screw A3

 

Main External Connection Dimensions

Main External Connection Dimensions

 

Send Inquiry