Knowledge

What is manual butterfly valve

May 15, 2025 Leave a message

1. Basic Definition
A manual butterfly valve is a butterfly valve that can be opened and closed or adjusted by manual operation. Its core component is a disc-shaped butterfly plate installed in the valve body. During operation, the valve stem is rotated by rotating the handwheel or handle to rotate the butterfly plate within the range of 0-90° to complete the function of cutting off or throttling the pipeline medium.

2. Core Structure and Working Principle
Main Components
Valve body: usually made of cast iron, stainless steel and other materials (such as DN50~DN1000 specifications), and the connection methods include flange type, clamp type, etc.; Butterfly plate: circular disc structure, streamlined design to reduce fluid resistance; Valve stem: connects the butterfly plate and the operating mechanism to transmit the rotational torque; Sealing components: nitrile rubber, polytetrafluoroethylene and other materials, supporting elastic or metal hard seals.
‌Workflow‌

‌Fully open state‌: The butterfly plate rotates to 90° and is parallel to the pipeline, and the medium flow resistance is minimal;
‌Flow regulation‌: Throttling is achieved through angle control (such as 30°, 60°);
‌Fully closed state‌: The butterfly plate rotates to 0° and is perpendicular to the pipeline, completely blocking the medium.

Manual Triple Offset Butterfly Valves
3. ‌Core features‌
‌Simple structure‌
Only core components such as valve body, butterfly plate, and valve stem are required, which are small in size, light in weight, and easy to install and maintain.
‌Flexible operation‌
Supports direct operation of the handle or worm gear reduction device (such as models D371X, D373H, etc.), low torque demand in manual mode, suitable for frequent opening and closing scenarios.
‌Multiple sealing forms adaptation‌
‌Rubber seal‌: Suitable for normal temperature (-20℃~150℃) and water, gas and other media;
‌Metal hard seal‌: resistant to high temperature (up to 300℃), high pressure (1.0MPa~1.6MPa) and corrosive media.
4. Typical application scenarios
Industrial field: steam cutoff in petroleum and chemical pipelines, cooling water flow control in power systems;
Municipal engineering: water supply network pressure regulation, sewage treatment plant medium distribution;
Special working conditions: low-pressure scenarios that require rapid opening and closing, such as powder transportation and liquid filling.

Manual Triple Offset Butterfly Valves
5. Selection points
Seal material
Choose rubber (for general working conditions) or metal seal (high pressure, high temperature scenarios) according to the characteristics of the medium;
Connection method
The clamp type is suitable for compact spaces (such as the D71X series), and the flange type is suitable for high-pressure large-diameter pipelines (such as the D343H model);
Operation method
For small valves (DN≤200), handle operation is preferred, and large-diameter or high-pressure valves need to be equipped with a worm gear box to amplify the torque.
6. Maintenance points
Regularly check the sealing surface: Check the wear of rubber or metal seals every quarter to avoid leakage (leakage rate ≤ 0.01%);
Valve stem lubrication: Inject food-grade grease (such as NLGI grade 2) every year to ensure smooth rotation.
Summary
Manual butterfly valves are widely used in fluid control in the industrial and municipal fields due to their simple structure, flexible operation and low cost. The butterfly plate rotation design can achieve fast opening and closing and precise throttling. The selection should be based on the medium characteristics, pressure level and installation space requirements.

Send Inquiry