Knowledge

What is a flanged ball valve

Jun 23, 2025 Leave a message

The flange ball valve is a type of ball valve connected to the pipeline through a flange. Its core features and functions are as follows:

1. Structural composition ‌
‌Main structure ‌
‌Ball: There is a circular channel in the center (the aperture is usually ≥80% of the pipe diameter), and it can be fully opened/closed by rotating 90°.
‌Valve seat seal ‌: The floating ball is sealed by the medium pressure to press the valve seat (medium and low pressure scenarios); the fixed ball is sealed by moving the valve seat (high pressure scenarios).
‌Flange end ‌: The valve body has flanges at both ends, which are connected to the pipeline by bolts and meet the ASME B16.5 standard.

2. Core advantages ‌
‌Low flow resistance and efficient circulation ‌
When fully open, the fluid is similar to a straight-through pipe, and the resistance coefficient is only 1/5 of the same length of pipeline.
‌Fast opening and closing and long life ‌
The switch can be completed by rotating 90°, and the operation time is ≤1 second (below DN100);
The sealing surface is isolated from the medium (on and off state), reducing corrosion and wear, and the service life can reach more than 100,000 times.
‌Bidirectional sealing and multifunctional‌
Both forward and reverse media can be sealed (zero leakage up to ANSI VI level);
Three-way ball valve (T type/L type) can achieve diversion, confluence or flow direction switching.

ball valve flange end

3. Applications

A‌pplications ‌Type‌ C‌ases
Petrochemical‌ Trunnion Ball High Pressure Valves (Class 600+) Crude oil pipeline (DN300, PN40)
‌Hazardous Media‌ Explosion-proof electric ball valve Natural gas station (Ex d IIC T6 explosion-proof certification)
Clean system‌ Stainless steel full bore ball valve Pharmaceutical ultrapure water pipeline (316L material)
‌Solid medium‌ V-type hard seal ball valve Slurry conveying (sheared fibers/particles)

4. Limitations ‌
‌Weak regulation performance ‌
Ordinary ball valves are only suitable for switch control, and special V-type ball valves are required for throttling (accuracy ±2% when the opening is 30%).
‌Large space occupancy ‌
The structural length of large-diameter (DN≥400) ball valves is twice that of butterfly valves, and larger space is required for installation.

5. Selection reference ‌
‌Diameter ‌: DN15~DN300 is preferred (>DN300 is recommended to evaluate butterfly valve); ‌

Pressure ‌: Floating ball ≤Class 600, fixed ball can reach Class 2500; ‌

Seal ‌: PTFE valve seat is used for corrosive media, and metal hard seal is selected for high temperature (≤550℃).

Flange Forged Ball Valve

Send Inquiry