Knowledge

What are API 6A valves

Dec 22, 2025 Leave a message

What are API 6A valves?

 

API 6A standard specifies the performance, design, materials, testing, and inspection requirements for drilling access equipment, covering specific equipment types such as gate blowout preventers, annular blowout preventers, hydraulic fittings, and drilling fours. The standard clarifies the operating conditions of the equipment under pressure, temperature, and downhole fluid conditions, and covers technical details such as welding, marking, storage, and transportation. As an important technical basis for API certification, this specification is widely used in the global oilfield equipment manufacturing industry.

 

Scope of Application

This International Standard applies to the following specific equipment:

a) Wellhead Equipment:

- Casing head housing:

- Casing head tee:

- Tubing head tee:

- Converter tee:

- Multi-stage casing (tubing) head body and tee.

b) Connection Devices and Accessories:

- Converter connection devices,

- Tubing head reducer:

- Top connection devices:

- Tees and crosses:

- Fluid sampler:

- Reducer tee and transition tee.

c) Casing hangers and tubing hangers:

- Mandrel hanger:

- Slip hanger.

d) Valves and Chokes:

- Single-layer completion valve:

- Multi-layer completion valve:

- Drive valve:

- Actuator valve:

- Check valve:

- Throttle valve:

- Surface safety valve and actuator, underwater safety valve and actuator;

- Back pressure valve.

e) Single-piece connection devices [flange type, threaded type, other end connection devices (OEC) and welded type]

- Weld neck connection device;

- Blind flange connection device:

- Threaded connection device:

- Reducing and sealing connection device:

- Pipe plug:

- Valve disassembly plug.

f) Other devices:

- Actuator:

- Grain:

- Pressure boundary penetration device:

- Gasket:

- Feeding tool and testing tool (see Appendix H):

- Wear-resistant bushing (see Appendix H).

Typical equipment terminology used in this International Standard is shown in Figures 1 and 2. All parts conforming to the metric tables in the main text of this International Standard or the US customary units table in Appendix B are qualified: see Introduction.

 

API 6A Valve drawning

API 6A Valve Drawning

1. Back pressure valve preparation                                                                    12. Double stud reducer

2. Downhole safety valve control line                                                                  13. Annular casing packer

3. Downhole safety valve control line outlet                                                        14. Casing hanger (slip type)

4. Tubing head reducer                                                                                       15. Threaded outlet connection

5. Tightening screw                                                                                             16. Pipe plug

6. Tubing hanger packer                                                                                     17. Casing head housing

7. Extension neck tubing hanger with downhole safety valve control line          18. Surface casing

8. Stud-type side outlet                                                                                       19. Wellhead support plate

9. Valve removal plug                                                                                          20. Tubing packer support
10. Bottom casing packer                                                                                    21. Tubing hanger (slip type)
11. Tubing head four-way                                                                                    22. Tubing

 

Contact now

 

Send Inquiry