Knowledge

Selection of gate valves

Jun 03, 2025 Leave a message

Gate valves are suitable for media such as steam and oil, as well as media containing granular solids and high viscosity, and are suitable for valves for venting and low vacuum systems. The selection of gate valves requires comprehensive consideration of multiple aspects. The following is a detailed introduction for you

 Clarify the use occasions and requirements

  • Use occasions: It is necessary to clarify whether the gate valve is used in industrial pipelines, water conservancy projects, building water supply and drainage, etc. Different use occasions have different requirements for gate valves. For example, industrial pipelines may have higher requirements for the material, pressure and temperature tolerance of the valve; building water supply and drainage may pay more attention to cost and convenience of operation.
  • Flow and pressure parameters: Select a gate valve of appropriate specifications according to the flow size and pressure requirements of the fluid in the pipeline system. Generally, the nominal diameter of the pipeline should match the nominal diameter of the valve to ensure good sealing and flow performance.

 Understand the types and characteristics of gate valves

There are many types of gate valves, such as rising stem gate valves, concealed stem gate valves, parallel gate valves, wedge gate valves, etc. Each type has its own unique usage characteristics and advantages:

  • Rising stem gate valve: suitable for occasions where the movement of the valve stem needs to be observed visually, such as in some industrial production lines where the valve switch status needs to be checked frequently.
  • Concealed stem gate valve: suitable for occasions where space is limited and it is not convenient to observe the movement of the valve stem, such as some underground pipeline systems or places with narrow internal space of equipment.
  • Parallel gate valve: suitable for low-pressure, large-diameter pipelines, its gate plate is parallel to the valve seat sealing surface, and can achieve a better sealing effect when closed.
  • Wedge gate valve: suitable for medium and high-pressure pipelines, through the wedge-shaped gate plate and the valve seat sealing surface to form a certain angle to achieve a tighter seal.

Wedged Gate Valve

 Selection based on medium characteristics

The characteristics of the medium are important factors in selecting gate valves. It is necessary to consider the properties of the medium (such as corrosiveness, abrasiveness, viscosity, particle content, etc.), temperature, solid particle size, etc., in order to select suitable gate valve materials and sealing structures:

  • Corrosive medium: Corrosion-resistant materials should be used to manufacture valves, such as gate valves made of stainless steel, duplex stainless steel, Hastelloy, monel, etc. For strong acidic media, valve bodies, gates and valve seats made of stainless steel or special alloys can be selected; for alkaline media, corresponding corrosion-resistant material combinations must also be selected. At the same time, the influence of factors such as the concentration and temperature of the medium on the corrosion resistance of the material should be considered, and the appropriate corrosion resistance grade should be selected.
  • High-temperature medium: High-temperature resistant gate valves should be selected, such as gate valves made of special materials such as alloy steel or ceramics. Different materials have different temperature resistance ranges. For example, metal seals are suitable for high temperature conditions and can withstand higher temperatures; while rubber seals are generally suitable for normal temperature conditions, and their temperature resistance range is usually between -20℃ and 120℃; polytetrafluoroethylene seals have a wider temperature resistance range, up to -100℃ to 250℃.
  • Viscous media: For media with high viscosity, the flow capacity and sealing performance of the valve should be considered. Generally, it is necessary to select valves with larger flow channels and good sealing performance to ensure that the medium can pass through the valve smoothly and can be effectively sealed when closed. For high-viscosity media, you can also consider selecting gate valves with special structures, such as streamlined gate designs, to further reduce flow resistance.
  • Particle-containing media: If the medium contains solid particles, a valve with good anti-clogging ability should be selected. For example, you can choose a gate valve with a larger flow channel and a higher surface hardness of the gate and valve seat, or install a filter in front of the valve to prevent particles from entering the valve and damaging the sealing surface and gate. For media containing particles, you also need to pay attention to the cleaning and maintenance of the valve, and regularly clean the impurities inside the valve to ensure the normal operation of the valve.

  consider the operation mode

According to the operation requirements and the actual situation on site, choose appropriate operation modes such as manual, electric, pneumatic or hydraulic, and consider the convenience and safety of operation:

  • Manual operation: For occasions with low operation frequency, low requirements for automation, or manual operation is required in some special circumstances (such as power outages, equipment maintenance, etc.), a manual drive device can be selected. The manual gate valve has a simple structure and low cost, but the operation is relatively laborious, and it is suitable for small-diameter and low-pressure pipeline systems.
  • Electric operation: If fast switching and automatic control are required, an electric drive device can be selected. The electric gate valve is easy to operate and can be remotely controlled, but it is necessary to consider the type and stability of the power supply, and whether the power of the electric device can meet the opening and closing requirements of the valve. The electric gate valve is suitable for large-diameter, high-pressure occasions that require frequent operation or remote control.
  • Pneumatic operation: The pneumatic gate valve uses compressed air as the power source, has the advantages of quick action and convenient operation, and is suitable for dangerous places such as flammable, explosive, toxic and harmful. When selecting a pneumatic drive device, pay attention to whether the pressure and flow of the air source meet the requirements.
  • Hydraulic operation: Hydraulic gate valves are suitable for occasions that require greater driving force and high-precision control, but the reliability and maintenance requirements of the hydraulic system are high, and the quality and pressure of the hydraulic oil need to be checked regularly.

Manual Gate Valves

 Follow standards and specifications
When selecting and designing gate valves, relevant national standards and specifications should be followed to ensure the safety and reliability of the gate valves. For example, according to the recommended national standard "GB/T 32808-2016 Valve Model Compilation Method", the model compilation of the gate valve includes information such as valve type, drive mode, connection form, structural form, sealing surface material, pressure level and valve body material. Different manufacturers may have some specific model representation methods, and the specific meaning may vary. If necessary, you can refer to the manufacturer's product samples or consult professionals.
  Other factors to consider

  • Installation location: Correctly select the installation location of the valve for easy operation and maintenance, and leave enough space for necessary adjustments and maintenance work. For example, for occasions that require frequent disassembly or overhaul, a gate valve structure that is easy to install and repair should be selected, such as a rising stem gate valve or a gate valve with a bracket.
  • Budget considerations: When purchasing a gate valve, in addition to considering its performance parameters, you must also consider the cost-effectiveness, including the purchase price, transportation costs, installation costs, and maintenance costs of the valve. When choosing a cost-effective gate valve, you must consider factors such as quality, performance, and price to avoid pursuing low prices while ignoring product quality and performance.
Send Inquiry