Knowledge

What is the difference between PTFE and rubber valve

May 23, 2025 Leave a message

There are the following differences between PTFE valves and rubber valves:

  • Material properties

PTFE: Polytetrafluoroethylene, which has extremely strong chemical corrosion resistance and can resist the erosion of almost all strong acids, strong alkalis, organic solvents and other chemical substances. It has a wide temperature resistance range and can maintain good performance in the temperature range of -200℃ to 260℃. It has an extremely low friction coefficient and good self-lubrication, which can reduce friction between valve components and reduce wear. However, it has poor elasticity, relatively low mechanical strength, easy creep, high processing difficulty, and relatively high cost.
Rubber: There are many types, such as nitrile rubber, fluororubber, silicone rubber, etc. Different types of rubber have different properties, but in general, rubber has good elasticity and flexibility, and can adapt to certain valve wear and deformation. It has relatively poor temperature resistance and corrosion resistance, and is generally suitable for normal temperature or low temperature environments, as well as media that do not require particularly high corrosion resistance. The cost is relatively low and the processing technology is relatively simple.

  • Sealing performance

PTFE: It performs well in sealing performance, can form a good sealing surface, and can achieve zero leakage. It is suitable for occasions with extremely high sealing requirements, such as high-purity medium transportation in the chemical, pharmaceutical, semiconductor and other industries.
Rubber: It also has good sealing performance and can effectively prevent medium leakage, but compared with PTFE, in some extreme working conditions, such as high temperature, high pressure or highly corrosive medium environment, the sealing performance of rubber may decline, aging, deformation, tearing, etc., resulting in sealing failure.

Rubber Seal Butterfly Valve

  • Applicable scenarios

PTFE: Commonly used in valves in chemical, petroleum, pharmaceutical, electronic, food and other industries, which usually involve highly corrosive, high temperature, high pressure or high purity media. For example, in chemical production, valves are used to transport highly corrosive media such as concentrated sulfuric acid, hydrochloric acid, and hydrofluoric acid; in semiconductor manufacturing, valves are used to transport high-purity gases.
Rubber: Widely used in valves for general media such as water, air, steam, and petroleum. In some occasions where corrosion resistance and high temperature resistance are not required, such as valves in urban water supply, heating, and ventilation systems, rubber valves have good adaptability. In some low-temperature environments, such as valves in air conditioning and refrigeration systems, rubber valves can also perform well.

  • Life and maintenance

PTFE: Due to its excellent corrosion resistance and wear resistance, under normal use conditions, PTFE valves have a long service life and are not easily eroded and worn by the medium. However, PTFE materials are relatively brittle and may crack or be damaged when subjected to external impact or frequent opening and closing, requiring regular inspection and maintenance.
Rubber: The service life of rubber valves is relatively short because rubber is prone to aging, hardening, and cracking. Under some harsh working conditions, such as high temperature, high humidity, and strong oxidizing medium environments, the aging speed of rubber valves will accelerate. Therefore, rubber seals need to be replaced regularly to ensure the sealing performance and normal operation of the valve.

PTFE Lined Butterfly Valve

Send Inquiry