Knowledge

What is the difference between a high-pressure and low pressure ball valve

May 30, 2025 Leave a message

The core difference between high-pressure ball valves and low-pressure ball valves is reflected in the pressure bearing capacity, structural design and application scenarios, which can be analyzed from the following five aspects:

1. Pressure level and scope of application

‌High-pressure ball valves‌

The working pressure is usually not less than ‌1.6MPa‌ (some can reach ‌700 kg/70MPa‌), which is specially used in high-pressure systems such as natural gas pipelines, hydraulic equipment and chemical reaction devices, and must comply with ‌API 598/ISO 5208‌ leakage standards.

‌Low-pressure ball valves‌

The upper pressure limit is generally ‌1.6MPa‌, which is suitable for low-pressure scenarios such as water supply, HVAC, etc., and the sealing requirements are relatively loose.

2. Differences in structure and materials

‌Seal design‌

The high-pressure type adopts ‌hard seal (tungsten carbide/Stellite alloy)‌ or ‌double soft seal (PTFE+metal)‌ to ensure zero leakage under extreme pressure.

The low-pressure type is mainly ‌single-layer PTFE soft seal‌, focusing on cost and low-temperature medium compatibility.

‌Valve body material‌

High-pressure valves are often made of ‌stainless steel (316/304)‌ or ‌chrome-molybdenum alloy steel‌, and the valve stem is made of ‌17-4PH precipitation hardened steel‌ to enhance shear resistance.

Low-pressure valves are mostly made of ‌carbon steel, brass‌ or ‌reinforced plastic‌, focusing on lightweight and corrosion resistance.

High Pressure Forged Ball Valve_0003_10002

3. Performance parameter comparison

‌Temperature tolerance‌

High-pressure valves cover ‌-196℃~649℃‌ (cryogenic treatment type can reach liquid nitrogen temperature), and low-pressure valves generally adapt to ‌-29℃~150℃‌.

‌Flow characteristics‌

High-pressure ball valves are mostly ‌full-bore design‌ to reduce pressure loss; low-pressure valves can choose ‌reduced-bore structure‌ to reduce costs.

‌Response speed‌

High-pressure valve drivers are mostly equipped with ‌pneumatic/electric actuators‌ (response ≤1 second), and low-pressure valves often use manual worm gear boxes.

4. Safety and maintenance

High-pressure valves are prone to leakage risks when the medium is suddenly released, and the blowout-proof valve stem structure and sealing surface wear need to be checked regularly.

Low-pressure valves have low pressure and high safety redundancy, and the maintenance cycle can be extended to 1-2 years, requiring only routine lubrication.

5. Typical application areas

High-pressure ball valves

Petroleum and natural gas: high-pressure gas pipelines, LNG tank imports and exports

Industrial equipment: hydraulic presses, supercritical fluid reactors

Low-pressure ball valves

Municipal engineering: water plants, sewage treatment systems

Civil facilities: building HVAC, household gas pipelines.

low pressure ball valve_0002_124327dfba0996060ee1838886aca2bd

Send Inquiry