-
Working principle:
The electric three-piece ball valve mainly controls the opening and closing action of the ball valve through an electric actuator. The electric actuator receives electrical signals from the control system (such as 4-20mA current signals or voltage signals, etc.), converts electrical energy into mechanical energy, and drives the valve stem to rotate.
The valve stem is connected to the ball. When the valve stem rotates, it drives the ball to rotate 90° in the valve body. There are through holes on the ball. When the through holes of the ball are aligned with the channels of the valve body, the valve is in an open state and the medium can pass smoothly; when the ball rotates 90° and the through holes are perpendicular to the channels of the valve body, the valve is closed to prevent the medium from flowing.

-
Structure:
- Valve body: It consists of three parts of the valve shell, and the middle valve body and valve ball are clamped from both ends by four longer bolts. This structural design allows the valve to be removed without removing the pipeline threads when repairing and disassembling. The middle part of the valve body can be removed by directly removing the four bolts, which facilitates maintenance and repair.
- Ball: It is the core component of the ball valve, usually made of stainless steel and other materials, with good corrosion resistance and sealing. There are through holes on the ball to control the flow of the medium. The ball fits tightly with the valve seat to ensure the sealing performance of the valve.
- Valve seat: Generally made of elastic sealing materials such as polytetrafluoroethylene (PTFE), etc., installed inside the valve body, in contact with the ball, and plays a sealing role. When the valve is closed, the valve seat can fit the ball tightly to prevent medium leakage.
- Valve stem: Connect the electric actuator and the ball, transfer the rotational motion of the electric actuator to the ball, and make the ball rotate 90°. The valve stem usually has good mechanical strength and wear resistance to ensure long-term stable operation.
- Electric actuator: It is the driving device of the electric three-piece ball valve, which consists of a motor, a reducer, a control circuit and other components. It can convert the input electrical signal into the rotational motion of the valve stem to realize automatic control of the valve. The electric actuator also has a manual operation function so that manual operation can be performed in the event of a power outage or failure.
