The use of butterfly valve in the following working conditions, the recommended choice of butterfly valve:
① Require throttling, regulating and controlling the flow;
② slurry media and media containing solid particles;
③ requires a short length of the valve structure;
④ require fast opening and closing speed occasions;
⑤ small differential pressure occasions.
In the two-position adjustment, shrinkage of the channel, low noise, cavitation and vaporization phenomenon, a small amount of leakage to the atmosphere, abrasive media, you can choose butterfly valves.
In the special conditions of throttling regulation or sealing strict, or wear and tear, low temperature and other conditions of use of butterfly valves, need to use a special design of metal hard seal with regulating device of three eccentric or double eccentric butterfly valves.

Characteristics of butterfly valve
Butterfly valve sealing ring material is generally used rubber, plastic, but the use of working temperature is low; such as the use of metal or other high-temperature resistant materials to make the sealing surface, can be used for high temperature.
Due to the butterfly valve butterfly plate movement with wiping, so most of the butterfly valve can be used for media with suspended solid particles, based on the strength of the seal can also be used for powder and granular media, it should be noted that the multi-level metal hard seal butterfly valve is not applicable to this condition, because once the particles into the non-metallic interlayer, it will affect the sealing performance, and even destroy the sealing surface.
Butterfly valve structure length and overall height is small, fast opening and closing speed, in the fully open, has a small fluid resistance, when open to about 15 ° ~ 70 °, and can be flexible flow control, butterfly valve structure principle is the most suitable for the production of large diameter valves.
