News

Heat Treatment Of High Temperature Valves

Jan 24, 2024 Leave a message

  • After hot working, forgings shall be cooled to less than 1000" F [538°C] prior to heat treatment in accordance with Table 1.
  • Low-Alloy, Ferritic, and Martensitic Stainless Steels-Low-alloy, ferritic, and martensitic stainless steels shall be heat treated in accordance with the requirements of the

Section and Table requirements for heat treatment.

aLiquid quenching-After agreement by the purchaser, liquid quenching followed by tempering is permitted, and the tempering temperature shall be used for each grade.

bMarking - Liquid quenched and tempered parts shall be marked with the letters "QT".

c In addition, Grade 1, Grade 2 Grades F1, F2, and F12 materials may be heat treated to a minimum temperature of 1200F [650°C] after final cold or hot forming.

high temp valves

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  • Austenitic and ferritic-austenitic stainless steels-Austenitic and ferritic-austenitic stainless steels shall be heat-treated in accordance with the requirements of the section and table.

a In addition, when the temperature of the forgings is not less than the minimum solid solution temperature specified in Table 1, immediately after hot working, austenitic grade steel forgings (except for grades F 304H, F 309H, F 310, F 310H, F 316H, F 321, F 321H, F 347, F 347H, F 348, F 348H, F 45, and F 56) may be (a) The quenching is carried out one by one in a rapid manner.

b If special heat treatment methods are to be used, see Supplementary Requirement S8.

  • Heat treatment may be carried out before machining.
  • Wrought or rolled bars - Wrought or rolled austenitic stainless steel bars permitted in section 5.4 for machining of cylindrical parts and parts machined from these bars, which do not require heat treatment after machining, shall be supplied in accordance with the heat treatment requirements specified in A 479/A 479M or in this standard, and are permitted to be lightly cold-drawn and straightened after heat treatment.

steel valves

Send Inquiry