Knowledge

Working principle of y-globe valve

May 22, 2025 Leave a message

  • Core structure

Y-type globe valve consists of valve body, bonnet, valve stem, valve flap (spool) and seals.13 Its valve body is Y-shaped design, the fluid passage is tilted, which can reduce the flow resistance and pressure loss.38 The valve flap is usually cylindrical, and the sealing surface is Flat or conical surface, and the valve seat to form a sealing pair.

 

  • The opening and closing mechanism

Valve stem drive: by rotating the valve stem (manual or actuator-driven), driving the valve flap along the seat centre line vertical lift.

Fluid control:

opening state: valve flap upward, fluid through the inclined flow path, resistance is small, the flow rate increases with the increase in opening height.

Closed state: the valve flap downward pressure on the seat sealing surface, forced to block the flow of media.

y pattern globe valve

  • The flow direction and sealing characteristics

Unidirectional flow design: the medium flow direction is stipulated as top-down (above the valve flap into the valve cavity), the use of media pressure to assist in sealing, reducing the operating force required to close.

Sealing principle:

valve and seat sealing surface through the valve stem pressure tightly affixed to form a flat or conical seal.

Sealing surface material is often cobalt-based alloy or hard coating, to enhance corrosion resistance and anti-scratch performance.

 

  • The performance characteristics of

flow regulation:

valve flap open to 25% -30% of the nominal diameter of the maximum flow rate, the full open position is precisely controlled by the valve flap stroke.

Applicable to flow regulation needs, but not high-precision scenarios (need to match the throttle valve or control valve).

Low flow resistance and durability: Y-type flow path optimises the fluid path and reduces pressure loss; stem and packing design reduces friction loss and prolongs life.

Send Inquiry