Knowledge

What is Wafer Type Soft Sealing Butterfly Valve

Dec 24, 2025 Leave a message

What is Wafer Type Soft Sealing Butterfly Valve

 

The wafer-type soft-seal butterfly valve is a key device in industrial pipeline systems for controlling the on/off state and flow rate of media, mainly used in industries such as petroleum, chemical, water treatment, and power. Its core structure consists of a valve body, a butterfly plate, and a sealing assembly. The butterfly plate is rotated from 0° to 90° by a drive mechanism to achieve pipeline opening and closing and flow regulation. In the fully open state, it can be parallel to the fluid direction to reduce flow resistance.

 

Specification

◆ Nominal Diameter: 10mm~1000mm and 1/2"~60"

◆ Nominal Pressure: 1.0MPa~16.0MPa/150Lb~1500Lb/10K~160K

◆ Operating Temperature: -196℃~700℃

◆ Standards Applicable: GB, DIN, API, ANSI, JIS, BS, etc.

◆ Valve Body Material: Carbon steel, stainless steel, alloy steel, ultra-low carbon stainless steel, titanium alloy, high-nickel alloy, and Monel alloy, etc.

◆ Drive Method: Manual, worm gear drive, bevel gear, electric, pneumatic, hydraulic, etc.

 

Core Structure and Working Principle

Structural Composition

Material: Rubber (NBR, EPDM, FKM), silicone, or PTFE, achieving sealing through extrusion deformation.

Structure: Single, double, or triple eccentric design reduces friction on the sealing surface during opening and closing, extending service life.

Valve Body: Wafer design with flanged ends, directly clamped between pipe flanges by bolts. Its thickness is only 1/3 that of traditional flanged valves, saving space.

Butterfly Plate: Circular flat plate, surface coated with epoxy resin or lined with polytetrafluoroethylene (PTFE) to reduce media adhesion.

Valve Stem: Passes through the center of the butterfly plate, connecting to an electric/pneumatic actuator or manual handle, achieving 90° rotation for opening and closing.

Soft-Seal Seat:

Working Principle

Opening and Closing Process: When the butterfly plate is rotated to be perpendicular to the pipeline, it closes; the sealing ring deforms under pressure to fill the gap. When parallel, it is fully open, allowing direct media flow.

Flow Regulation: The flow area is changed by partially opening the butterfly plate, but the regulation accuracy is lower than that of ball valves and gate valves.

 

Performance Characteristics

Sealing Performance

Zero Leakage: Sealing grade up to GB/T 13927-2008 Class V or ISO 5208 Rate Class A, suitable for water, air, oil, and other media.

Corrosion Resistance: Selectable sealing ring materials, such as EPDM (acid and alkali resistant), FKM (oil resistant), and PTFE (strong corrosion resistant).

Fluid Resistance

At full open, the flow resistance coefficient ζ≈0.5-1.0, with low pressure drop, superior to gate valves and globe valves, reducing pump energy consumption.

Opening and Closing Characteristics

Double Eccentric Structure: The valve stem is offset from the center of the butterfly plate and the center of the pipeline, reducing sealing surface friction and lowering opening and closing torque by 30%-50%.

Opening and Closing Speed: Manual type ≤5 seconds, electric type ≤15 seconds, rapid response to system needs.

Lifespan and Reliability

Soft sealing ring lifespan approximately 1-3 years (depending on operating conditions), valve body lifespan ≥10 years, opening and closing cycles ≥100,000 times.

 

Typical Application Scenarios

Building Water Supply and Drainage Systems

Fire Water Tanks: DN150 wafer-type soft-seal butterfly valves paired with float valves achieve automatic water replenishment control.

Domestic Water Tanks: DN100 valves are used for level regulation to prevent backflow.

Advantages: Quick installation; no need to disassemble pipe flanges for maintenance.

HVAC Systems

Chiller Water Piping: DN200 valves regulate water flow, balance system pressure, and reduce energy consumption.

Cooling Towers: DN250 valves control circulating water volume to prevent pump dry running.

Advantages: Low pressure drop, avoiding system efficiency reduction due to valve resistance.

Water Treatment Industry

Sewage Treatment Plants: DN300 valves are used for inlet and outlet pipes, resistant to chloride ion corrosion (EPDM sealing rings are selected).

Chemical Dosing Systems: DN50 valves precisely control the dosage of chemicals, with reliable sealing to prevent leakage.

Advantages: Replaceable soft sealing rings reduce long-term maintenance costs.

Agricultural Irrigation

Irrigation Canals: DN400 valve controls water flow; easy manual operation, suitable for remote areas.

Drip Irrigation Systems: DN25 valve adjusts micro-flow; soft seal prevents clogging.

Advantages: Low cost, resistant to silt and sand abrasion (using wear-resistant rubber sealing rings).

 

Key Selection Parameters

Nominal Diameter (DN)

Common range: DN40-DN1200. For larger diameter models, valve body rigidity and butterfly plate strength must be considered (e.g., for DN≥800, a hard seal structure is recommended).

Pressure Rating (PN)

Soft-seal wafer butterfly valve applicable pressure: PN≤1.6MPa (low-pressure conditions); exceeding this requires a hard seal or thickened valve body.

Temperature Range

NBR Rubber: -20℃ to +120℃ (General Purpose);

EPDM Rubber: -40℃ to +150℃ (Acid and Alkali Resistant);

FKM Rubber: 0℃ to +200℃ (Oil Resistant);

PTFE: -200℃ to +260℃ (Ultra-low or High Temperature Conditions).

Media Characteristics

Clean Media: Such as water and air, use standard soft seals;

Particulate Media: Such as sewage and slurry, use wear-resistant rubber (such as nitrile rubber + carbon fiber composite);

Corrosive Media: Such as acid and alkali solutions, use PTFE or fluororubber seals.

Control Method

Manual Type: Handle or worm gear driven, low cost, suitable for infrequent opening and closing;

Electric Type: Supports switch control or proportional adjustment, can be integrated into DCS/PLC systems;

Pneumatic Type: Fast response speed (≤0.5 seconds), suitable for explosion-proof environments.

 

Wafer Type Soft Sealing Butterfly Valve in stock

Wafer Type Soft Sealing Butterfly Valve factory

Contact now

 

Send Inquiry