Manifold Pressure Reducing Valve belongs to the category of pressure reducing valves and is mainly used in building water supply systems, fire protection systems, and branch pipes in high-rise buildings. It achieves pressure stabilization by reducing the water pressure in the pipeline. Its nominal diameter is DN15~50, the applicable medium is tap water, the working pressure is 0~1 MPa, the main material is copper, and the applicable temperature is 1~120℃.
This valve adopts a direct-acting diaphragm structure, with no jamming design and is resistant to dirt and scale. It does not require the installation of filters or bypass pipes. The outlet pressure can be precisely adjusted by spring linkage diaphragm, with a pressure reduction ratio of more than 10:1, low pressure loss, and excellent hydraulic characteristics. It can stably control the outlet pressure fluctuation within 8% of the inlet change [1]. Through floating piston or diaphragm sensing, dynamic and static pressure can be adjusted, which can optimize the water supply pressure distribution of high-rise buildings, replace the zoned frequency-controlled water pump, and reduce water waste by about 30%. During installation, attention should be paid to the water flow direction and antifreeze measures to avoid misinstallation of a check valve or failure caused by improper spring adjustment.
Working Principle of Manifold Pressure Reducing Valve
The manifold pressure reducing valve regulates pressure by actuating the diaphragm or valve disc with the spring setting, driven by the outlet pressure. When the outlet pressure exceeds the set value, the spring is compressed, closing the valve disc; when the downstream water pressure drops, the spring rebounds, opening the valve and maintaining a stable outlet pressure.
Structural Features
Direct-acting structure: No external power required; automatically regulates pressure based on the medium pressure.
Dirty and scale-resistant: Special structural design prevents impurities from clogging the system, eliminating the need for a filter.
Simple piping: Saves bypass pipes and installation space, reducing piping costs.
Manifold Pressure Reducing Valve Technical Parameters
Nominal Pressure: 1.0~1.6MPa (varies depending on the model).
Applicable Temperature: 1℃~120℃ (material selection is affected by medium temperature).
Pressure Reduction Ratio: Up to 10:1
Applications of the Manifold Pressure Reducing Valve:
High-rise buildings: Optimize water supply zoning, replacing variable frequency pumps.
Fire protection systems: Maintain stable water pressure, protecting piping and equipment.
Domestic water supply: Protect water appliances from high pressure damage.
Troubleshooting Manifold Pressure Reducing Valve
Frost Damage: In cold regions, lack of protection can cause the valve body to freeze and crack.
Incorrect Installation: Reverse water flow direction affects pressure reduction.
Pressure Imbalance: Over-tightening of the spring causes abnormal outlet pressure.
Manifold Pressure Reducing Valve factory

