What is Groove Resilient Seated Gate Valve (Rising Stem)
The grooved stem resilient seated gate valve features a triple O-ring seal design between the valve stem and bonnet, reducing frictional resistance during opening and closing, significantly minimizing leakage, and allowing for seal replacement without interrupting pipeline media flow. Furthermore, the valve body is internally coated with epoxy resin, and the inner and outer surfaces of the valve plate are covered with rubber to prevent molten iron or corrosion, making it suitable for drinking water.
The valve plate is integrally rubber-coated both internally and externally, ensuring a strong bond between the rubber and the ductile iron valve plate, preventing detachment, and providing excellent elastic memory. The internal epoxy resin coating and rubber coating on the inner and outer surfaces of the valve plate prevent molten iron or corrosion, making it suitable for drinking water.
When closed, the grooved stem resilient seated gate valve relies solely on media pressure for sealing. The media pressure forces the gate's sealing surface against the valve seat, achieving a self-sealing effect. Most gate valves use forced sealing, requiring external force to press the gate against the seat when closed.
A grooved, rising stem, resilient-seated gate valve, also known as a rising stem gate valve, features a gate that moves linearly along with the valve stem. Typically, the rising stem has a trapezoidal thread, which, through the nut on the valve top and guide grooves on the valve body, converts rotational motion into linear motion, thus converting operating torque into operating thrust.
The valve body is cast, and its geometric dimensions ensure excellent sealing without requiring any internal machining.
For DN450-600mm valves, a force-saving device can be added, requiring approximately half the normal torque. Only a small handwheel is needed to operate the valve fully open or fully closed under pressure. This force-saving device requires the valve to be fully opened before reverting to its original function after each activation.
Structural features of the grooved, rising stem, resilient-seated gate valve:
1. Self-sealing bonnet: The bonnet and valve body employ a self-sealing design. Within the allowable pressure range, the higher the fluid pressure, the tighter the seal.
2. The upper sealing structure between the valve stem and the valve cover employs a three-O-ring design. Compared to the packing seal structure of traditional gate valves, this design provides a tighter seal through each ring, significantly reducing frictional resistance. With the valve at any opening degree, under pressure, and equipped with a valve stem locking function, the valve stem will not be forced out by pressure during operation and maintenance, preventing personal injury.
3. The lightweight and compact structure reduces the maximum working height by 60mm-300mm or more compared to traditional gate valves, saving engineering space. The body is made of ductile iron, reducing weight by approximately 20%-30% compared to traditional gate valves, facilitating installation and maintenance.
4. The integrally rubber-coated valve core features a ductile iron skeleton that is integrally coated with rubber and a new vulcanization technology, ensuring a tight and reliable fit, accurate dimensions, and excellent sealing elasticity, effectively isolating the valve core metal from the fluid.
5. The integrated copper nut valve core's copper nut and ductile iron skeleton are tightly connected using a special process, preventing loosening even under long-term operation and water flow impact, thus avoiding valve control failure.
6. Flat-bottomed valve seat: Our resilient seated gate valve features a full-flow straight-through design at the bottom, equivalent to a straight pipe, making it less prone to debris accumulation.
7. Hygiene requirements: The valve body is coated with epoxy resin, and the inner and outer surfaces of the valve core are covered with rubber, preventing rust or corrosion. It can be directly used in drinking water systems, food, and pharmaceutical industries.
Groove Resilient Seated Gate Valve (Rising Stem) in stock

