When the carbon steel electric gate valve is closed: The sealing surface can rely solely on medium pressure for sealing, that is, the medium pressure presses the gate disc's sealing surface against the opposite valve seat to ensure sealing. This is called self-sealing. Most gate valves adopt forced sealing, meaning external force is required to press the gate disc against the seat during closure to guarantee sealing.
The gate valve whose disc moves linearly with the stem is called a rising stem gate valve (also known as an outside screw and yoke valve). Typically, the rising stem has trapezoidal threads. Through the nut at the valve top and the guide groove on the valve body, rotational motion is converted into linear motion, transforming operating torque into thrust.
When opening the valve:
- Full flow passage is achieved when the gate disc lifts to 1:1 times the valve bore diameter, but this position cannot be monitored during operation.
- In practice, the stem's top position (immovable point) is used as the fully open reference.
- To prevent temperature-induced locking, the valve is typically reversed by ½–1 turn from this position as the operational fully open state.
- Therefore, the valve's fully open position is determined by the gate disc's actual displacement.
Applicable Standards:
Gate Valve, API600
Steel Valves, ASME B16.34
Face to face ASME B16.10
End Flanges ASME B16.5/ASME B16.47
Butt Welding ends ASME B16.25
Inspection and test API 598
Material: WCB
Valve Size:16 inch
Valve Operated Type: Electric Actuator
Pressure Rating: ASME CL, 150, 300, 600, 900, 1500, 2500
Temperature Range: -196°C~600°C

