Knowledge

What is a forged carbon steel ball valve

Jan 02, 2025 Leave a message

 Definition of forged carbon steel ball valve

Forged carbon steel ball valve is a valve forging obtained by applying pressure to the carbon steel ball valve blank using a forging machine to cause it to undergo plastic deformation.


 Processing methods for forged carbon steel ball valve

1. According to the forming method, it can be divided into open forging and closed forging. Open forging is free forging, which uses impact force or pressure to make carbon steel deform freely in all directions between the upper and lower anvil surfaces, and obtains forgings of the required shape, size and certain mechanical properties without any restrictions. Closed forging is to use a die on a special die forging equipment to form the blank to obtain a forging, which has high production efficiency, low labor intensity, precise size, small machining allowance, and can forge forgings with complex shapes.
2. According to the deformation temperature, it can be divided into hot forging, warm forging and cold forging. Hot forging is higher than 800℃. During hot forging, the deformation energy and deformation resistance are very small, and large forgings with complex shapes can be forged; between 300 and 800℃ is called warm forging. As long as the temperature and lubrication cooling are well controlled, good precision can be obtained; forging at room temperature without heating is called cold forging. During cold forging at low temperature, the size of the forging changes very little, and less oxide scale is formed, there is no decarburization on the surface, and good dimensional accuracy and surface finish can be obtained.

forged carbon steel ball valve

 Characteristics of forged carbon steel ball valves

1. It can eliminate the looseness of carbon steel casting, weld holes, and has better mechanical properties than castings. During forging, the metal undergoes plastic deformation, which has the effect of refining grains and continuous cutting fibers, so it is often used for the blank manufacturing of important parts.
2. The main material is carbon steel.

 

 Application scenarios of forged carbon steel ball valves

Forged carbon steel ball valves are generally used in pipelines with high pressure levels, mainly small diameters, generally below DN50. For example, in the pipelines of various systems in thermal power plants, it can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, mud, oil, liquid metal and radioactive media. Due to its superior mechanical properties and ability to withstand high pressure, it is suitable for occasions with strict requirements on fluid control.

forged carbon ball valve

Send Inquiry