Knowledge

What is a flanged check valve

May 09, 2025 Leave a message

The flange check valve is a valve that automatically opens and closes the valve disc by the flow of the medium itself to prevent the medium from flowing back. It is also called a check valve, a one-way valve, a reverse flow valve and a back pressure valve. The following is a detailed introduction about it:

Working principle
Opening in the downstream: When the medium flows in the specified flow direction, the valve disc is opened by the force of the medium, so that the medium can pass through the valve smoothly.
Closed in the reverse flow: When the medium flows back, the valve disc is closed by the sealing surface of the valve seat due to the dead weight of the valve disc and the reverse force of the medium, so as to prevent the medium from flowing back.
Structural type
Swing flange check valve: There is a hinge mechanism, and a valve disc like a door freely rests on the inclined valve seat surface. In order to ensure that the valve disc can reach the appropriate position of the valve seat surface every time, the valve disc is designed in the hinge mechanism so that the valve disc has enough swing space and makes the valve disc truly and comprehensively contact the valve seat. The valve disc can be made entirely of metal, or it can be inlaid with leather, rubber, or a synthetic covering surface on the metal, depending on the performance requirements. When the swing check valve is fully open, the fluid pressure is almost unimpeded, so the pressure drop through the valve is relatively small.
Lifting flange check valve: The valve disc is located on the valve seat sealing surface on the valve body. In addition to the valve disc being able to rise and fall freely, the rest of this valve is the same as the stop valve. The fluid pressure lifts the valve disc from the valve seat sealing surface, and the medium reflux causes the valve disc to fall back onto the valve seat and cut off the flow. Depending on the conditions of use, the valve disc can be an all-metal structure or in the form of a rubber pad or rubber ring embedded on the valve disc frame. Like the stop valve, the passage for the fluid through the lifting check valve is also narrow, so the pressure drop through the lifting check valve is larger than that of the swing check valve, and the flow of the swing check valve is less restricted.

Flanged Ball Check Valve

Function
Preventing medium backflow: This is the most important function of the flange check valve, ensuring that the medium can only flow in the specified direction, avoiding backflow in the system, thereby protecting the safety of equipment and pipelines.
Prevent pump and drive motor from reversing: Install flange check valves on the outlet pipes of some pumps. When the pump stops running or fails, it can prevent the medium from flowing back to the pump, avoid pump and drive motor reversal, and protect the equipment from damage.
Prevent the release of container media: For some containers that store media, installing flange check valves can prevent the medium in the container from being released under certain circumstances, ensuring the safety of the medium in the container.
Installation precautions
Installation position: The flange check valve should be installed on a horizontal pipe with the valve cover facing up and the flow arrow pointing in the flow direction so that the valve can perform its intended function.
Medium flow direction: During installation, you must carefully check whether the markings and nameplates on the valve meet the use requirements to ensure that the flow direction of the medium is consistent with the arrow direction on the check valve.
Pipeline cleaning: Before installation, the valve should be cleaned and the defects caused during transportation should be eliminated to ensure that the inside of the valve is clean and prevent impurities from affecting the normal operation of the valve.
Sealing inspection: During installation, pay attention to checking the sealing performance of the valve to ensure that the flange connection is well sealed to prevent medium leakage.

Send Inquiry