What grade is ASTM A126?
The ASTM A126 standard classifies the material into the following three classes based on the mechanical properties and application requirements of grey cast iron:
I. Class A
Mechanical properties: tensile strength ≥172 MPa, hardness range 160~240 HB.
Application Scenario: Suitable for low-pressure piping systems (≤1.0 MPa), such as general municipal water supply, sewage pipe fittings.
Class B (the most commonly used grade)
Mechanical properties: tensile strength ≥207 MPa, hardness range 180~250 HB.
Application Scenario: Suitable for medium and low pressure environment (≤1.6 MPa), typical applications include industrial valves, flanges and ANSI 125/150LB level piping systems.
Class C
Mechanical properties: tensile strength ≥ 276 MPa, hardness range 200~260 HB, with higher strength and wear resistance.
Application scenario: used for parts requiring higher mechanical strength, such as high-pressure pumps and valves or pipe fittings under complex working conditions, but the pressure is still limited to the applicable range of grey cast iron (usually ≤ 2.5 MPa).
Recommendations for grade selection
Class B is a general-purpose class, balancing cost and performance, accounting for more than 80% of practical applications;
Class B is the general class, taking into account both cost and performance, and accounts for more than 80% of practical applications15.

