Slab gate valve is a valve that realizes opening and closing control by sliding parallel gate plates. Its core structure consists of valve body, valve plate, valve stem and sealing components. It is designed for pipeline systems with high pressure and highly corrosive media (such as oil and natural gas).
1. Key structure and working mode
Gate plate design
Parallel double gate plate structure (some models have a propping mechanism), which forms a sealing pair through medium pressure or spring action.
The flow guide hole design is divided into two categories:
With flow guide hole: Reduce pressure loss, suitable for oil and gas pipelines that require pipe cleaning, but the cost increases by about 15%;
Without flow guide hole: Lightweight design, suitable for scenarios where pipe cleaning is not required, but the sealing surface is easily eroded by the medium.
Sealing mechanism
The floating valve seat is combined with an O-ring to achieve bidirectional sealing through preload, and the flatness error of the sealing surface is ≤0.001mm.
Patented sand fracturing technology (such as elastic sand blocking ring) can reduce the probability of sand accumulation and increase the life of the sealing gasket.
Drive Configuration
Electric device is standard, hydraulic or pneumatic actuator is optional, the valve stem thread extends to the bracket, and the stability is strong.
2. Main types and applicable scenarios
| Classification Dimension | Types and characteristics | Typical application scenarios |
|---|---|---|
| Structural design | Full-bore valve body (low pressure drop) vs. Venturi valve body (flow rate optimization) | Oil and gas trunk lines (such as West-East Gas Pipeline) vs chemical plants |
| Installation Environment | Buried type (IP68 protection) vs conventional type | City gas pipeline network vs refinery pipeline |

3. Performance advantages and limitations
Advantages
Pressure resistance reaches PN150 (special model PN100), applicable temperature range -29℃~121℃ (buried type extended to -40℃);
Opening and closing torque is only 50% of similar gate valves, easy to operate;
Flow regulation accuracy is better than conventional gate valves, and pressure drop is reduced by more than 30%.
Limitations
Models without diversion holes are prone to seal failure due to impurity accumulation and require regular maintenance;
The wear rate of the metal sealing surface is high under high pressure difference conditions, and a compensation spring design is required (the patented solution can extend the life to more than 500,000 operations).
4. Typical application areas
Energy transportation: natural gas long-distance pipelines (mainly buried);
Petrochemical: sulfur-containing crude oil processing, fracturing fluid control;
Urban infrastructure: gas pipeline node control.
Through structural innovation (such as diversion hole design) and material upgrades (316L stainless steel body + PTFE seal), flat gate valves have demonstrated high reliability and long life in complex working conditions.

