Butterfly valves, as an efficient and economical fluid control equipment, are widely used in industrial production. Selection process first to ensure that its performance matches the application requirements, the convenience and economy of valve operation is also very important. The following comprehensive consideration of media characteristics, working conditions and sealing requirements, the specific steps are as follows:
Consider the characteristics of the fluid (medium)
For liquids, the flow rate should generally not exceed 5m/s to avoid cavitation.
Corrosive media need to use corrosion-resistant materials (such as stainless steel, PTFE)
The temperature and pressure level
Select the valve body material according to the medium temperature (such as ductile iron for ≤ 350 ℃, stainless steel for high temperature and high pressure)
Pressure needs to match the nominal pressure.
Choose the type of butterfly valve
Medium line butterfly valves (common): also known as concentric butterfly valves are suitable for low pressure, large calibre, low leakage requirements (e.g. water and air regulation). They usually have high sealing performance and low cost.
Double Eccentric Butterfly Valves: Suitable for medium pressure, scenarios requiring longer service life, reducing seat friction and prolonging the service life of the valve.
Triple Eccentric Butterfly Valve: Suitable for high pressure and harsh working conditions, such as high temperature or more corrosive environment. The triple eccentric structure not only provides a tighter and tighter sealing effect with better sealing performance. It also reduces the operating torque and improves the efficiency and reliability of the valve.

To determine the driving mode of butterfly valve
Manual operation: directly through the handwheel or spanner operation, suitable for non-frequent adjustment occasions. Small diameter and operation frequency is not high occasions more suitable.
Electric operation: for applications requiring remote control or automation systems, which can be easily integrated with other control equipment to achieve a high degree of automation.
Pneumatic operation: for the need for rapid response, large operating force and other occasions, especially suitable for emergency cut-off or safety-related applications.
Selection of suitable sealing surface materials
Hard seals are suitable for high temperature and high pressure conditions, such as metal rings (high temperature and high pressure)
Soft seal is suitable for corrosive, highly toxic and highly hazardous media. Such as rubber (clear water / air), PTFE (strong corrosion).
Six, consider the connection
Clamp connection is easy to install, low cost, widely used in small diameter pipelines.
Flange type connection is suitable for large diameter and high pressure pipelines.
Clamp connection is commonly used in the food industry quick installation.

Material Selection
Butterfly valve body material should be selected according to the characteristics of the medium and working conditions. Common materials include ductile iron (room temperature water), cast steel (medium and high pressure), stainless steel (corrosive media) and special materials such as UPVC, CPVC and PTFE.
Sample selection process
Scenario: conveying corrosive liquid (pH = 2), pressure 1.0MPa, temperature 80 ℃, flow rate of 100m³/h.
Steps
1. The medium is corrosive liquid, choose stainless steel valve body (such as SUS316L).
2. Select three eccentric metal hard seal butterfly valve for high-pressure conditions.
3. Calculate the flow rate: assuming that the pipe diameter DN200, the flow rate ≈ 3.5m / s (in line with the requirements).
4. Actuator selection of electric, torque ≥ 240N-m.
