Knowledge

How safety valves work

Jan 09, 2025 Leave a message

A safety valve is a valve used to protect equipment and systems from excessive pressure, and its working principle and types are as follows:

 

1. Principle of operation

The operating principle of a safety valve is based on the balance between spring force and fluid pressure. When the fluid pressure in the system exceeds the set pressure limit, the safety valve automatically opens to release some of the pressure to maintain safe operation of the system. Once the pressure drops to within the proper range, the safety valve will automatically close and return to normal operation.

 

2. Types

  • Spring-loaded safety valve: The opening and closing of the valve is controlled by the force of the spring. This kind of safety valve has a compact structure, flexible adjustment, high sensitivity, and the installation position is not subject to strict limitations, which is the most commonly used kind of safety valve for pressure vessels.
  • Lever-type safety valves: the use of weights (weight through the role of the lever torque) will be the spool on the valve seat, so that the boiler steam pressure to maintain within the permissible range. When the steam pressure acting on the spool torque is greater than the pressure of the weight acting on the upper part of the spool, the spool is lifted off the seat and the steam is discharged to the outside.
  • Static Weighted Safety Valve: The weight of the annular pig iron disk added to the sleeve is utilized to press the spool against the valve seat to keep the boiler steam pressure within the allowable range. When the steam pressure acting on the spool on the torque is greater than the total weight of the pig iron disk, the spool is lifted up off the valve seat, the steam to the outside discharge.

pressure safety valve

3. Operation Process

  • Opening: When the working pressure at the inlet of the safety valve is lower than the downward force of the spring, the valve remains closed. When the working pressure reaches the critical point, steam begins to overflow into the valve cavity from the seat surface. In the gap formed between the upper and lower adjustment rings, the local restriction of the fluid causes an increase in pressure, which acts on a larger area and generates an additional force sufficient to overcome the spring force. At this point, the spool from the valve seat, the safety valve in the set pressure "jump start".
  • Closing: Once the safety valve is open, the position of the upper adjusting ring directs the flow of steam in a different direction, increasing the lifting force and causing the spool to reach full travel. If the position of the upper and lower adjusting rings are properly adjusted, full stroke opening can be achieved. At full stroke, the limit stop contacts the cover plate to eliminate vibration and increase valve stability. Steam enters the valve cavity through the vent hole in the adjusting ring while the spindle collar rises to a fixed position above the floating seal. The working area between the floating seal and the spindle is enlarged due to the difference in the two diameters on the overlapping ring. Vapor enters the chamber through the secondary gap formed by the spindle with the floating seal and collar, and is subsequently released to the atmosphere via the exhaust port and through the piping discharge connection.

 

4. Features

  • Column structure: The column is located on the outside of the safety valve body to avoid direct contact with high boiler temperatures and to maintain a relatively stable temperature. The double column allows the valve body to expand and contract with the boiler without affecting the performance of the safety valve, ensuring stability and predictability of the set pressure.
  • Thermal disc: The thermal disc is placed on the valve seat and forms the sealing surface of the safety valve. Commonly used chrome-nickel-iron alloy manufacturing, with excellent corrosion resistance, even at high temperatures and high pressures, can maintain the valve seat sealing.
  • Cover Plate Assembly: The cover plate rapidly discharges steam to ensure full stroke opening. During venting, the cover plate directs steam in a safe direction, isolating the spring from the hot steam and reducing spring fatigue.

safety valve 

Send Inquiry