Knowledge

How does a wedge gate valve seal

May 14, 2025 Leave a message

1. Core sealing principle
‌Forced wedge seal‌
When the valve stem is rotated clockwise, the valve stem thrust drives the wedge gate to squeeze against the valve seat, so that the sealing surfaces on both sides fit closely to form a mechanical seal. This rigid contact can resist the medium pressure.
‌Medium pressure assistance‌
‌Low pressure condition‌: The wedge force generated by the valve stem thrust is relied on to enhance the sealing pressure ratio and prevent medium leakage.
‌High pressure condition‌: The medium's own pressure will push the gate to further press the outlet valve seat to form a self-enhanced sealing effect.
2. Sealing surface structure design
‌Wedge angle matching‌
The sealing surface of the gate and the valve seat is symmetrically wedge-shaped (the angle is generally 2°-5°). The geometric wedge effect converts the valve stem thrust into a positive pressure perpendicular to the sealing surface, thereby improving the sealing reliability.
‌Elastic compensation structure‌
‌Elastic gate‌: An annular groove or flexible structure is set in the middle of the gate to allow the gate to deform slightly to compensate for processing errors or thermal deformation, avoid blocking and maintain the fit of the sealing surface.
‌Double gate hinge‌: The double gate connected by the spherical top center can adaptively adjust the contact angle with the valve seat to ensure uniform fit of the sealing surface.

Wedged Gate Valve
3. Sealing auxiliary mechanism
‌Single-sided forced sealing characteristics‌
Due to the limited influence of the medium force on the sealing pressure ratio at the inlet end, the wedge gate valve mainly relies on the single-sided forced sealing at the outlet end, which is suitable for one-way medium flow scenarios.
‌Opening and closing process optimization‌
When opening, the gate quickly moves away from the valve seat to reduce the wear of the sealing surface; when closing, the wedge amount is controlled by precise thread transmission to ensure uniform force on the sealing surface.
4. Material and processing requirements
‌High-precision processing‌: The wedge angle and sealing surface roughness (usually Ra≤0.8μm) need to be strictly controlled to avoid leakage or jamming.
‌Corrosion-resistant material‌: The sealing surface is often welded with hard alloy (such as Stellite alloy) or sprayed with ceramic to improve the wear resistance under high pressure and high temperature.
This sealing method combines mechanical forced sealing and medium self-tightening effect, making it widely used in high-demand scenarios such as oil, natural gas and steam pipelines.

Wedged Gate Valve

Send Inquiry