A flanged trunnion-mounted ball valve is a valve design in which the ball is fixed by trunnions (support shafts). Its core structure consists of a valve body, a ball, trunnion supports, a valve seat, and an actuator. Unlike traditional floating ball valves, the ball in an imported trunnion-mounted ball valve is fixed by upper and lower trunnions and rotates only around its axis to achieve opening and closing. This design significantly reduces operating torque and improves sealing reliability under high-pressure conditions.
Structural Features
Truncate Support System
The ball is connected to the valve body on both sides via trunnions, forming a fixed support structure. The trunnions are made of high-strength alloy steel (such as F91, F92) or stainless steel (such as 316L), with a nitrided surface to enhance wear resistance. The clearance between the trunnion and the ball is controlled within the range of 0.05-0.1mm, ensuring flexible rotation and no risk of leakage.
Bidirectional Sealing Seat
The valve seat adopts a spring-loaded design, achieving bidirectional zero leakage through metal-to-metal hard seals or soft seals (such as PTFE, PEEK). Under high-pressure conditions, the valve seat can automatically compensate for wear and maintain sealing performance. For example, at a pressure of 10MPa, the contact stress between the valve seat and the ball can reach 200N/mm², ensuring long-term sealing.
Low Torque Operating Mechanism
The operating torque of imported trunnion-type ball valves is only 30%-50% of that of floating ball valves, thanks to the trunnion support reducing friction between the ball and the valve seat. The drive unit can be selected from manual, pneumatic, or electric actuators. Electric actuators can be equipped with intelligent control modules for remote monitoring and fault diagnosis.
Performance Advantages
High Pressure Adaptability
Flanged trunnion ball valves can withstand Class 1500 (25MPa) or even higher pressure ratings, suitable for high-pressure scenarios such as oil and gas extraction and refining plants. The valve body is forged, and the wall thickness design conforms to ASME B16.34 standards, ensuring structural strength.
Wide Temperature Range
Valve body materials can be selected from carbon steel (WCB), cryogenic steel (LCC), or high-temperature alloy (Inconel), adapting to extreme temperature environments from -196℃ to 600℃. For example, in LNG receiving terminals, cryogenic inlet trunnion ball valves can operate stably at -162℃.
Wear Resistance and Long Service Life
The ball surface is coated with hard alloy (such as Stellite 6), achieving a hardness of HRC 60 or higher, effectively resisting media erosion. In media containing solid particles (such as coal slurry and mineral slurry), its service life can be 3-5 times that of floating ball valves.
Rapid Opening and Closing with Low Leakage
Opening and closing can be completed with a 90° rotation, with a response time of less than 5 seconds. It passes API 607 or API 6FA fire resistance tests, maintaining a seal even under fire conditions, with a leakage rate of less than 10 ppm.
Application Scenarios
Oil and Gas Industry
Used for high-pressure shut-off and flow regulation in wellhead equipment, oil pipelines, and refining units. For example, in deep-sea oil and gas development, imported trunnion ball valves can withstand high pressure and corrosive media on the seabed.
Chemical Industry
Suitable for conveying highly corrosive media (such as sulfuric acid and chlor-alkali). Valve body materials can be selected from Hastelloy (C-276) or titanium alloy, and the valve seat uses a PTFE+graphite composite seal.
Power and Heat
In supercritical thermal power units, imported trunnion ball valves are used for the isolation of steam pipelines, with a temperature resistance of up to 600℃ and a pressure rating up to Class 2500. Water Treatment
Used in seawater desalination, wastewater treatment, and other applications, the valve body is made of duplex stainless steel (2205), offering excellent resistance to chloride ion corrosion.
Selection and Maintenance Considerations
Selection Parameters
Pressure Rating: Select Class 150-2500 based on the system's maximum pressure.
Temperature Range: Match the medium temperature to the valve body material.
Sealing Type: Hard metal seals are suitable for high temperature and high pressure; soft seals are suitable for clean media.
Actuation Method: Select manual, pneumatic, or electric operation based on automation requirements.
Maintenance Recommendations
Regularly check the valve seat seal; replace the sealing ring every 5000 operations or 1 year.
Lubricate the trunnion bearing; add high-temperature grease (such as Molykote 33) every 3 months.
Avoid frequent partial opening to reduce valve seat wear.
Trunnion ball valve flanged class 600 drawning

