1. Product
The ASTM A182 F316 floating ball valve is a two-piece, side-entry, soft-seated ball valve with a forged 316 stainless steel body and trim. In a floating ball design, the ball is held between the two seats and is pressed onto the downstream seat by line pressure, producing bubble-tight shut-off in clean media service. With sizes from DN15 to DN50 and pressure classes up to Class 2500 in the product range, this valve suits general industrial water, gas, oil and mildly corrosive media where stainless steel construction is required.
2. Materials of Construction
Body material: ASTM A182 F316 - forged 316 stainless steel, offering good corrosion resistance to water, neutral salts, and many organic and inorganic chemicals, with improved pitting resistance over 304 grades.
Trim material: ASTM A182 F316 with RPTFE (reinforced PTFE) seat - the glass/carbon reinforcement reduces cold flow and extends seat life while keeping PTFE chemical resistance.
Other body options in the range: carbon steel (e.g., ASTM A105/A216 WCB) and alloy steel for different service conditions.
3. Technical Specifications
| Parameter | Value |
|---|---|
| Design standard | ASME B16.34; general soft-seated ball valve practice per ISO 7121 |
| Structure | Two-piece body, side entry, bolted bonnet, soft seat |
| Nominal size | DN15–DN50 (sample: 1/2 in x 3/8 in reduced bore, DN15 x DN10) |
| Pressure class | Class 150–2500 (sample: Class 150 / PN20) |
| Bore type | Reduced bore (full bore available) |
| End connections | Flanged RF, socket weld (SW), NPT, BSP |
| Working temperature | −29 °C to +150 °C (with RPTFE seat; depends on seat material) |
| Operation | Lever, spring-return lever, pneumatic or electric actuator |
| Test and inspection | API 598 (shell, seat and backseat tests) |
| Key features | Anti-static device, fire-safe design, anti-blowout stem, locking device |
4. Design Features and Safety
Anti-blowout stem: the stem is retained by the body so it cannot be ejected under pressure if the gland fails - a key safety feature for stainless ball valves.
Anti-static device: bonding elements between ball, stem and body keep electrical resistance below 10 Ω (per ISO 7121 practice) for hydrocarbon service.
Fire-safe design: metal back-up seat seals after the soft seat burns, type-tested per API 607 / ISO 10497.
Locking device: lever can be padlocked in open or closed position to prevent unauthorized operation.
5. Applications
Typical applications include water treatment, compressed air and gas distribution, fuel oil handling, and mildly corrosive process media in petrochemical, natural gas and general industrial plants. Because 316 stainless steel resists chloride pitting better than 304, the valve is also suitable for marine and coastal environments, brackish water and food-contact piping where permitted by the applicable codes. For steam service, verify the seat temperature limit - with an RPTFE seat the valve is limited to the values in the table above.
6. Ordering Information
When requesting a quotation, please provide: size and bore (reduced/full), pressure class, end connections and thread/flange standard, body and trim material, seat material, operating temperature, actuation type (lever, gear, pneumatic, electric), and any special requirement (anti-static, fire-safe, NACE). This allows us to confirm the exact pressure-temperature rating and testing scope.
Frequently Asked Questions
What does ASTM A182 F316 mean? ASTM A182 is the specification for forged stainless steel piping components; F316 is the grade corresponding to 316 stainless steel. The body and trim are forged 316, giving better mechanical properties and corrosion resistance than cast equivalents.
What is the difference between floating and trunnion ball valves? In a floating design the ball floats between the seats and is pressed onto the downstream seat by line pressure; in a trunnion design the ball is supported by bearings. Floating valves are economical for small and medium sizes and moderate pressures.
What temperature range can this valve handle with an RPTFE seat? With an RPTFE seat the working temperature range is typically −29 °C to +150 °C. Above this, a different seat material (e.g., metal seat) is required.
Which end connections are available? Flanged (RF), socket weld (SW), NPT and BSP are available in the range; the sample specification is flanged RF. Threaded ends follow ASME B16.11/NPT practice.
Can this valve be used for steam? Only within the RPTFE seat temperature limit . For higher temperature steam, request a metal-seated version.
Is the valve fire-safe and anti-static? Yes, the range includes fire-safe design per API 607 / ISO 10497 and anti-static devices with resistance below 10 Ω, which should be stated explicitly in the order for hydrocarbon service.
