Knowledge

A105N Side Entry Trunnion Ball Valve

Sep 03, 2025 Leave a message

The A105N "Side-Entry Ball Valve" (also referred to as Side-Entry Design Ball Valve) denotes a specific valve body structure and assembly method.

‌Core Characteristics:‌

This ball valve is designed primarily for internal component assembly and maintenance through both sides of the valve body. More specifically:

‌Assembly Method:‌

The internal core components - the ball, seats, and stem - are inserted into the valve cavity through the valve body's side (i.e., one of the flange or welding end faces connected to the pipeline).

After assembling the internal components, one or more large bolts or lock rings (referred to as end caps, trunnion covers, pressure rings, or locking rings) are typically screwed in from the side to secure these parts inside the valve body, ultimately achieving valve body sealing (usually through additional face gaskets).

The main valve body structure often takes the form of a U-shaped shell or similar configuration.

 

Specification

Design Standard: API 6D, BS 5351
Nominal Size: 2 Inch, DN50
Nominal Class: CL 2500 LB, PN420
Body Material: Carbon Steel ASTM A105N or ASTM A350 LF2
Bore Type: Full Bore or Reduced Bore
Operation: Lever/Gear
Test and inspection: API 598, API 6D
Structure: 3pcs Body, Side Entry, Bolted Bonnet, Soft Seat
Seat Insert: RPTFE, DEVLON, NYLON, PEEK
Face to Face: ASME B16.10
End Connection: RTJ Flanged
Trim Material: ASTM A182 F6A, ASTM A182 F304, ASTM A182 F316, ASTM A182 F51, ASTM A182 F53, ASTM A182 F55, ASTM A105+ENP, ASTM A350 LF2+ENP
Key Features: Double Block & Bleed (DBB), Anti-static Device, Fire-Safe Design, Anti-Blowout Stem, Emergency Sealant Injection, Low Emission (Optional), DIB (Optional).
DBB-Double Block and Bleed: Single valve with two seating surfaces that, in the closed position, provides a seal against pressure from both ends of the valve with a means of venting/bleeding the cavity between the seating surfaces.

 

Product Range

Body Material: Carbon Steel, Stainless Steel, Alloy Steel
Normal Diameter: 1/2 Inch - 48 Inch (DN15 - DN1200)
Pressure Range: 150 - 2500 LB
Operation: Manual (lever, gear), Pneumatic Actuator, Motor Actuator
Working Temperature: -26°C to +150°C
End Connection: Raised Face (RF), Ring-Type Joint (RTJ), Butt Weld (BW), Hub

 

Side Entry Trunnion Ball Valve

 

Send Inquiry