Products
A105 Globe Valve
video
A105 Globe Valve

A105 Globe Valve

A105 globe valve is made of carbon steel forging material of ASTM A105 standard, which has good strength and toughness. It is widely used in oil, natural gas, chemical, electric power and other industries, especially in occasions that need to withstand higher temperature and pressure.

a105 globe valve Description

 

A105 globe valve is a forced sealing valve made of ASTM A105 forged steel, which is specially used for medium cutoff and flow control in high-temperature and high-pressure pipeline systems. Its core features include:

‌Material features‌: A105 is a low-carbon forged steel (similar to 20 carbon steel), with high strength, high temperature and high pressure resistance, and can withstand working conditions up to 570℃;
‌Sealing design‌: The sealing surfaces of the valve disc and the valve seat are often welded with hard alloy (such as Stellite), which is wear-resistant and erosion-resistant, and achieves two-way tight sealing;
‌Structural form‌: It supports full-diameter or reduced-diameter design, and the valve cover adopts self-sealing, threaded or welded connection to adapt to different installation scenarios.

 

a105 globe valve specification

 

‌ASTM A105/A105M‌: specifies the chemical composition and mechanical properties of valve forgings;
‌GB/T 12228-2006‌: Chinese standard specifies the technical conditions of carbon steel forgings.
‌Design and manufacturing standards‌:
‌ANSI B16.34‌: High-pressure valve design specification, covering Class 150~2500 pressure levels;
‌ASME B16.25‌: Structural dimensions and groove requirements for butt welding ends;
‌JB/T 3595‌: Domestic power station valve acceptance standard, verifying strength and sealing performance

 

Features ‌
‌Pressure and temperature resistance‌: ‌

Pressure range‌: Covering Class 150~Class 2500 (PN16~PN420), supporting 16~32MPa high-pressure scenarios; ‌

Temperature range‌: -29℃~+570℃, high-temperature models are suitable for power station steam systems. ‌

Operational reliability‌: ‌

Quick opening and closing‌: The valve disc has a short stroke (maximum flow is reached when the nominal diameter is opened at 25%~30%), and the opening and closing time is short; ‌

Impact-resistant design‌: The damping weight balances the closing torque to prevent the water hammer effect. ‌

Maintenance convenience‌: ‌

Online maintenance‌: The inverted sealing structure of the main body reduces the frequency of shutdown maintenance; ‌

Packing optimization‌: The double packing sleeve is automatically adjusted to reduce the risk of leakage.

 

 
a105 globe valve
 
a105 globe valve
a105 globe valve
a105 globe valve

Selection recommendations

Working condition adaptability:

High pressure and high temperature scenario: Class 1500 or above is preferred, and the valve body material is chrome-molybdenum steel (WC6);

Corrosive media: Sealing surface is welded with hard alloy, and the valve stem is made of 316 stainless steel for corrosion protection.

Operation mode selection:

Frequent opening and closing: Configure pneumatic or electric actuator (must meet IP67 protection level);

Manual operation: DN≤80 valves can use worm gear box to reduce operating torque.

Installation form:

Space-limited scenario: Select welding end or compact flange connection (ANSI B16.5);

Frequent disassembly requirements: Ring-connected bonnet structure (RJ flange) is preferred

 

Hot Tags: a105 globe valve, China a105 globe valve manufacturers, suppliers, factory, globe valve for fiberglass materials, globe valve for flow control, globe valve with socket weld end, globe valve for clean fluids, globe valve for environmentally friendly materials, globe valve for nickel manufacturing

Send Inquiry