Triple-offset butterfly valves
Description
The triple eccentric butterfly valve is a type of butterfly valve that achieves high-performance sealing through multiple offset designs of the valve stem axis, valve seat rotation axis and valve body channel axis. Its core feature is the optimization of the sealing contact surface pressure and wear resistance through the triple eccentric structure, which is suitable for media control under high temperature, high pressure and harsh working conditions.
Structural design
Three eccentric positions:
- First eccentricity: The valve stem axis deviates from the center of the butterfly plate to reduce the friction of opening and closing.
- Second eccentricity: The valve stem axis deviates from the center of the valve body channel to reduce wear.
- Third eccentricity: The axis of the valve seat sealing surface and the axis of the valve body channel form a β-angle oblique cone to achieve asymmetric sealing contact.
Key components:
Butterfly plate: Disc-shaped structure, made of stainless steel, carbide or ceramic material to enhance corrosion resistance.
Valve seat: Metal hard seal or soft and hard composite seal, supporting two-way zero leakage.
Valve stem and drive mechanism: Anti-flying design, suitable for manual, pneumatic or electric operation.
Sealing principle and core advantages
- Torsion seal: Relying on the contact surface pressure between the valve seat and the butterfly plate to achieve sealing, rather than traditional elastic deformation, reducing the risk of sealing failure after long-term use.
- Zero leakage and pressure resistance: Metal hard seals can withstand temperatures up to 538°C and PN25 pressure levels (about 25 bar), suitable for extreme working conditions.
- Low opening and closing torque: The eccentric structure allows the butterfly plate to detach from the valve seat at the moment of opening, and progressively tightens when closing, reducing the operating torque by 30%-50%.
- Long life and interchangeability: Precision machining tooling (such as slant disc positioning technology) ensures that the machining error of the valve seat sealing cone surface is ≤0.02mm, improving the interchangeability of the valve body and the efficiency of on-site maintenance.
Triple-offset butterfly valves Specification
|
DN |
DN40~400mm (For other DN, please indicate when ordering) |
|
Nominal Pressure |
1.0~4.0Mpa (For other pressure standard, please indicate when ordering) |
|
Body material |
WCB (C), SS304 (P), SS316 (R) |
|
Seal material |
PTFE (F), Metal hard seal (H) |
|
Media Temper. |
W2: -20~150℃, W4: -29~425℃ |
|
Connection mode |
Flange, Wafer |
|
Pneumatic actuator |
JLAT series, JLAW series, Imported actuator series |
|
Action mode |
Double acting, Single acting normally closed, Single acting normally open |
|
Electric actuator |
JLA series, JLB series, lmported actuator series |
|
Control mode |
Standard switch type, Integral regulating type, Integral switch type, Field bus type |
Triple-offset butterfly valves



Applications
- Petrochemical: Cutting off and regulating high-temperature oil products and corrosive media in refining plants.
- Electricity and metallurgy: High-temperature steam (≤538℃) and cooling water system valves.
- Municipal and environmental protection: Large-diameter flow control of water supply and gas pipelines.
Hot Tags: triple-offset butterfly valves, China triple-offset butterfly valves manufacturers, suppliers, factory, Triple Offset Valve Butterfly, butterfly valve market, selection of butterfly valve, Wafer Butterfly Valve, Double Offset Butterfly Valve, import butterfly valves


