Products Description
The stem of an open stem valve rises or falls as the valve opens or closes. Usually with trapezoidal threads on the lifting stem, the rotary motion is converted into linear motion, i.e., the operating torque is converted into operating thrust, by means of a nut in the center of the gate plate as well as by means of guide grooves in the valve body. When the valve is opened, the passage of the fluid is completely free when the height of the gate lift is equal to 1:1 times the through diameter of the valve, but this position cannot be monitored during operation. In actual use, it is the apex of the valve stem as a mark, i.e., the position of opening motionless, as its fully open position. In order to take into account the locking phenomenon of temperature change, usually in the open to the apex position, and then back 1/2-1 turn, as the fully open position of the valve. Therefore, the fully open position of the valve is determined by the position of the gate (i.e., stroke). This type of valve should be installed horizontally in the pipeline.
Specifications
| PN | 16 - 40 |
| DN | 50 - 350 |
| Temperature Rating | -120°C up to +450°C |
| Shell Materials | cast carbon steel combination with monel and other special alloys |
| Connections | Low temperature carbon steel High temperature carbon steel Carbon steel Stainless steel High temperature stainless steel High chromium stainless steel Hastelloy Inconel Pure nickel Titanium Monel 6Mo Other special alloys |
| Connections | Flanged ends |
| Operation | handwheel, gear operator, Pneumatic- and electric actuators |
Rising Stem Valve Advantages
1. overall encapsulation: open stem soft seal gate valve gate adopts overall encapsulation, its good covering performance and precise geometry, to ensure reliable sealing and life.
2. light weight: the valve body is made of ductile iron, light weight, easy to install.
3. Flat-bottomed seat: the bottom adopts the same flat-bottomed seat design as the water pipe, which does not produce debris siltation and makes the sealing more reliable.
4. Corrosion resistance: the inner cavity of the gate valve is coated with non-toxic epoxy resin to prevent corrosion and rust, which can be used not only for raw drinking water, but also for sewage system.
GNEE Gate Valve With Rising Stem in Stock


About Us
GNEE Group is a professional valve supplier in China with 5 production lines, our supply range includes: butterfly valves, ball valves, check valves, globe valves, gate valves, etc. Our valves are manufactured according to the production standards of various countries and passed the SGS, ISO and other quality testing organizations. We supply 500 tons of valves every month, welcome to contact us anytime.

Hot Tags: rising stem gate valves, China rising stem gate valves manufacturers, suppliers, factory, gate valve flow rate, wafer type gate valve, shut off valve, gate valve thermometer, pneumatic gate valve, gate valve prototype


